I just put this regulator on my jeep, works very well....
Is the 3 or 4 row going to be wider? I don't have much separation between my fan and radiator as it is.
What was the amount of rows on a stock radiator from a 79 CJ 5 with the 258?
Thanks Wally, That helps out alot! I'm pretty sure I don't have the canister, so venting it to the air seems like my simplest option.
I can't quite say on what you would want to offer for that rig. But I can tell you that that hard top is very hard to find.
I'm not quite sure if that's what I'm talking about Tim. :| The picture I've been working off of I posted on the first page post #5 They...
Thanks Wally those pic's would be awesome! I don't have the canister either, so would plugging the port be a bad idea? I think I found the...
As I just recently learned (read Tim's last link) incorrect plumbing WILL cause added leaks coming from your valve cover, and PCV grommets.
Well that is a concern as well, and my major concern was that I new that PCV system wasn't hooked up correctly. So I got the clean air tube...
Thanks for the help Homebrew, I will switch that hose when I get home tonight and see if my valve cover leak returns to its usual old self.
Do you happen to have a picture of your setup? And what did you plug the port with?
Nothing! :(:roll: Sounds like I've got the fresh air intake pluged into the vapor vent port. See pic... [ATTACH] So if I plug the...
I haven't touched the valve cover yet. That was going to be a project in the near future. But it seems strange that it would start leaking more...
Ok so I finally got my weber installed on my 258 and at the same time I put on the TFI upgrade. Before the two upgrades my valve cover leaked,...
Separate names with a comma.