Next time I have the T90 out I'll be putting in a sealed bearing and 1 1/2 felt seals. Should have remembered about this but I haven't worked on a...
After going down hills I've noticed 90w coming from the weep hole in the bell housing, must be coming out of the front bearing retainer set up....
That's what I was going for with this build, a mostly stock CJ2A.
Just got this one 99% done. [ATTACH]
Just wondering how to install it. I had the transmission out and put it back in without the fork. I put the fork back in thru the inspection hole...
Just put one in and used this type https://walcks4wd.com/Oil-Gauge-Hard-Line-MB-GPW-CJ2A-CJ3A_p_1460.html
Just spent 2 hours swearing trying to put the fork in thru the inspection hole in the bell housing. Is there an easier way?
I use LUK usually.
Found the thread, guess I'll try the roller method.
Saw them, didn't want to pay $40 for four. Says you can only use them once.
Separate names with a comma.