1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

jackdog's Recent Activity

  1. jackdog replied to the thread T90 Leaking From The Front.

    Next time I have the T90 out I'll be putting in a sealed bearing and 1 1/2 felt seals. Should have remembered about this but I haven't...

    Aug 11, 2022 at 10:16 AM
  2. jackdog liked melvinm's post in the thread T90 Leaking From The Front.

    Back in the old days we would use 1-1/2 front seals , 1- new one and half of the old one . This would seal the input shaft .

    Aug 11, 2022 at 10:11 AM
  3. jackdog liked Howard Eisenhauer's post in the thread T90 Leaking From The Front.

    On Tonk I slipped some greased O rings over the input shaft to occupy the space between the bearing (sealed) and the inside of the...

    Aug 11, 2022 at 8:14 AM
  4. jackdog liked Jw60's post in the thread T90 Leaking From The Front.

    There really is no seal on the front of the t-90a. The felt keeps dust out but it doesn't keep oil in. Make sure your not over full on...

    Aug 11, 2022 at 8:14 AM
  5. jackdog liked fyrmn's post in the thread T90 Leaking From The Front.

    Check out “metalshapers” t90 rebuild on YouTube He uses a “sealed bearing” ( inside seal removed) to prevent this from happening. I...

    Aug 11, 2022 at 8:13 AM
  6. jackdog posted a new thread.

    T90 Leaking From The Front

    After going down hills I've noticed 90w coming from the weep hole in the bell housing, must be coming out of the front bearing retainer...

    Forum: Early CJ5 and CJ6 Tech

    Aug 10, 2022 at 10:31 AM
New Posts