I probably should have posted this on the Jeepster page but there isn't a lot of activity over there. I'm working on a 1967 Jeepster with the...
I purchased an 1/8" petcock to go in it which would not fit I also tried an 1/8" pipe nipple which was too big. I will try and post a picture of...
I am currently overhauling the V-6 in my 1967 Jeepster. The machine shop removed and subsequently lost the plug for the coolant drain plug for...
[IMG] [IMG] [IMG] [IMG] [IMG] This is a Trail Forge kit that I installed in my 1967 Jeepster. The kit was very well fabricated....
TrickPatrick, Concerning your springs, I just new springs made for my Jeepster at a Semi-Tractor trailer repair business. I had them add 2" of...
Here is a picture of the roll cage for my Jeepster. Its is a trail forge kit and it was pretty well fabricated. It took me a couple of evenings...
I didn't go with a radical lift on my Jeepster, just 1 1/2" to take the sag out of the rear end, but I had mine made at a heavy truck repair shop....
K&N makes a filter that will fit the 2GC Carb. It also has the fitting to connect the breater tube to. The part # through Summit is KNN-60-1070....
The bar came from Trail Forge. It is their Sport Bar kit.
What kind of lube do you put in the closed knuckle housing? The shop manual states universal joint lubrication, using #1 or #2, but I'm guessing...
Does anyone make a replacement Hub for the front end of a 1967 Jeepster. Mine still has the originals and I would like to install something a...
Separate names with a comma.