Yep I got them from Bear Creek , Excellent quality !!!
Yep I bought the valve cover ones , the air cleaner one and shift pattern...all very nice quality !!
Is that the one that has the sending unit and lines held in by the locking ring and not screws ?? I'm gonna have to call around and see if I can...
The FSM shows the return running along side the feed line all the way back to the tank but shows them both entering the top of the tank where the...
Where does all you guys lines run from... on top of the tank or out the bottom ?? Is there room under the seat for the feed line to come out the...
Factory had some type of welting type material.... I'm gonna use a pc. of @ .100 thick rubber wrapped around instead
When I got Rusty it had an underseat tank with feed line coming off the bottom of tank along with a drain and a return line going back and in the...
I got mine at Napa using those part #'s.... guy looked it up by those #'s....had many applications
I called them... said call anytime so I did... nice guy I talked to. Said they make it as they get the order , said it should ship out the...
Has anybody ordered replacement panels from them ?? I'm thinking about replacing the rear floor of Rusty while I'm at it.... Was wondering on...
The locker looks like a Detroit or Eaton electric locker...Looks cool
Ratchet tiedowns with axle straps , what I used on my YJ when I was trailering it. Do you have D-rings on the deck for strapping to ??
Mufflers are just some generic turbo mufflers $13 each , 220 hp should probably only have 2 - 2 1/4" duals to retain some back pressure for...
Separate names with a comma.
