My Jeep didn't have a heater when I bought it. I found one from Heater Craft and used that. It doesn't have vents but with a soft top it doesn't...
Then it is a T-18 with the T-98 cast in the top. It is still a great transmission with a very adequate low first gear. For me, 4 speeds are...
I may put a new set of pistons in but I am not rebuilding it any further than that. I understand how expensive that nut was, got it.
I am one of the lucky T-98 owners and love it. I don't know much about other transmissions but if you can't find a T-98 what about an NP 435? If...
I did what you suggested, kaiser_willys and pulled all three pistons on the passenger side. My first sign something was bad was the bits of metal...
That is some good advice, thanks.
That may have happened but it seems so unbelievable to happen. I can't think of another explanation and there is only one nut missing. The other...
The first picture shows the ding in the piston. All the pistons look hammered to me, looks like something has been in every cylinder which makes...
I removed the passenger side head tonight. Didn't take too long to do. The interesting thing is I found evidence of something rattling inside...
I went through several cables over the past few years. Turns out the plastic inside the sheathing was melting to the cable since it sat over one...
Thanks for all the help and the horror stories. I am all set to take the head off, might have to wait until tomorrow.
Yeah, I hear you on that. I pulled the intake the other day. Shouldn't be too much of a job, just being lazy.
I pulled all of those spark plugs and found no sign of a loose object and the engine wasn't rebuilt all that long ago so I am leaning towards...
That is what I thought I should do. You think I should pull both heads?
This happened last week, haven't driven it since I heard the noise...much. I started it up and immediately heard a knocking. I shut it down...
Separate names with a comma.