1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Recent Content by abnsigo

  1. abnsigo
    Post

    Steering slop

    I've got a '73 as well and the first thing I modified on my Jeep was the steering. I had the same problem and it was really scary to drive on the...
    Post by: abnsigo, Feb 11, 2007 in forum: Intermediate CJ-5/6/7/8
  2. abnsigo
    Post

    What's a good clutch for my jeep?

    I have a centerforce II in my '73 CJ with a 304. I pulled my engine last week for a rebuild and the clutch has very little wear. It's been in my...
    Post by: abnsigo, Feb 4, 2006 in forum: Intermediate CJ-5/6/7/8
  3. abnsigo
    Post

    best beginners welder

    I have a Millermatic 135 with gas and it is great. I'm fairly new to welding but have had no problems with this little machine. I don't think...
    Post by: abnsigo, Dec 2, 2005 in forum: Builds and Fabricators Forum
  4. abnsigo
    Post

    Exhaust routing to prevent station wagon effect

    I had the same problem when I exited mine to the sides. I bought in-frame headers and had the exhaust routed to the rear corners. It was a great...
    Post by: abnsigo, Mar 23, 2005 in forum: Intermediate CJ-5/6/7/8
  5. abnsigo
    Post

    Wiring question..help please.

    My recomendation is to first purchase the Chilton's manual. My Chilton's has many miles on it from looking at the wiring diagrams. I wish I had...
    Post by: abnsigo, Mar 4, 2005 in forum: Intermediate CJ-5/6/7/8
  6. abnsigo
    Post

    Revolver Shackles

    Thanks for the advice. I've got extended brake lines so I don't think that would be a problem. I'm sure I'd have to replace shocks though....
    Post by: abnsigo, Feb 26, 2005 in forum: Intermediate CJ-5/6/7/8
  7. abnsigo
    Thread

    Revolver Shackles

    Just started thinking of buying the revolver shackles for increased articulation. I've heard pretty good things about them but wanted to get...
    Thread by: abnsigo, Feb 25, 2005, 4 replies, in forum: Intermediate CJ-5/6/7/8
  8. abnsigo
    Post

    73 cj5 seat brackets

    Try dropping a line to George's Jeep Parts. His web site is www.willys.net. I've purchased parts from him before and he's really helpful. He's...
    Post by: abnsigo, Feb 20, 2005 in forum: Intermediate CJ-5/6/7/8
  9. abnsigo
    Post

    Steering woes

    I also have a '73 CJ5 and when I purchased it and drove it the two hour drive home I had my life flash in front of me every time a big truck...
    Post by: abnsigo, Feb 18, 2005 in forum: Intermediate CJ-5/6/7/8
  10. abnsigo
    Post

    4 barrel carb question???

    When posting threads like this there is always some block head that always suggests upgrades that you really don't want to do but let me be that...
    Post by: abnsigo, Feb 15, 2005 in forum: Intermediate CJ-5/6/7/8
  11. abnsigo
    Post

    80 CJ5 Rear Main Seal?

    I'm glad to hear it went well. Mine was pretty easy too. I paid to have it done the first time and he messed it up. I wish I would have...
    Post by: abnsigo, Feb 15, 2005 in forum: Intermediate CJ-5/6/7/8
  12. abnsigo
    Post

    80 CJ5 Rear Main Seal?

    I'm not so sure if the 6 is a two piece seal but in my 304 I just pulled the oil pan, took off the back bearing cap, and removed the seal. It was...
    Post by: abnsigo, Feb 13, 2005 in forum: Intermediate CJ-5/6/7/8
  13. abnsigo
    Post

    yet another lift quiestion

    I've got a procomp 2 1/2 with 1 1/4 shackles and a 2 inch body lift. I wanted to only go with a 1 inch body but had problems with my stearing...
    Post by: abnsigo, Feb 13, 2005 in forum: Intermediate CJ-5/6/7/8
  14. abnsigo
    Post

    I need your opinions Straight 6 or V8?

    I've got a '73 CJ5 with a V8 and really like the power. If the $ is there go with the V8. My .02. Good luck...Casey
    Post by: abnsigo, Feb 12, 2005 in forum: Intermediate CJ-5/6/7/8
New Posts