Fella's, Thank you... Straight 30 weight worked great... It's amazing how much the oil affected the motor! Pottsy
Also should I run regular pump gas or should I put a lead additive in it?
Ok, I have a F-head and she has great compression and all cyl. are with in 5% of each other. This motor starts very easy and runs great. My...
This pack with grease idea is great.... I'll have to use it next time... I taped the hole out to a larger thread size and the thread a bolt in to....
Thanks Bruce...... :beer:
I guess when the clutch disc has stamped on it "Towards Flywheel" then your should position the disc in that direction.... I found my problem... I...
so do you think that slight TICk-TICK-Tick sound prior to clutch engagment should worry me enough to pull it apart or does that sound kind of normal?
Thanks fella's good info! I adjusted it last night and it seems to work well? The clutch grabs at about half way up on the pedal movement. But one...
Good morning fella's! I built the header on my 134 f-head. I then ran 2 inch tube with .120 wall from the header to a Thrush muffler (Not The...
Ok, I pulled it apart and (pressure plate off and all). Everything looked ok? The fork was in the proper place, the spring and throw out bearing...
Ok, I put a new clutch assembly (Pilot bearing, throw-out bearing, 9.250 clutch, plessure plate assembly, clutch fork & Clutch fork spring) in...
Yeap....... "Omix ADA".....that's the one... :evil: Thanks for the offer, I just order one from my local NAPA for $21.85.... I talked to...
Separate names with a comma.
