Pulling the carb tomorrow and going to send it to Scoutpilot this week. Thanks everyone for the info.
Wow!! All of the googlefu and patience i threw at this and I never came across Scoutpilot. What a wealth of knowledge! Thanks for the heads up....
Looks like I have an L head out of a dj3a... The studs that mount the carb to the intake are parallel to the firewall. Throttle linkage is on...
I've had my 51 3a for several years and the carb has been giving me fits on and off the entire time. Several rebuilds by 2 different guys that...
The threads look ok. The plug seems thread in normally. The seat isn't in bad shape. It's definitely showing it's age though.
'51 L-head losing compression in cylinder 3 through the spark plug. I know this from spraying soapy water around the plugs. •Problem get worse as...
There are a bunch of docks with marine fuel by me but no gas stations carry it. I have to drive to a marina and fill gas cans and walk back to...
Rebuilt my carb 2 years ago. About 1000 miles and 2 years later, had to rebuild again and it was the filthiest gummiest smelliest carb I've ever...
Frame mounted pedals was the plan. Gonna have to lengthen them I guess. Still seven an a half weeks from finding out. Good news is body block...
I went with 1 1/4" . The body (shell valley) is 8 weeks out so any updates or further questions won't be until July :(
Doing a 60' cj5 build and I want to run some body lift blocks to help with a few clearance issues. I'm torn between 1 1/4" and 2". 2" would help a...
Separate names with a comma.