1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Recent Content by Syber4x4

  1. Syber4x4
    Post

    aftermarket fuel and temp gauges

    I have a 66 CJ-6 with the fuel tank under the drivers seat. I ended up with a Autometer #2516 Gauge. Somehow I determined my sender was of the...
    Post by: Syber4x4, Aug 9, 2011 in forum: Early CJ5 and CJ6 Tech
  2. Syber4x4
    Thread

    Another Master Cylinder request

    I was lucky enough to find a used herm-the-overdrive-guy MC frame mount bracket -thanks to Kamel. Now I need to order a new MC from that list I...
    Thread by: Syber4x4, Aug 8, 2011, 0 replies, in forum: Early CJ5 and CJ6 Tech
  3. Syber4x4
    Post

    Newbie electrical questions

    I bought hi-temp auto wire from KayJay Co. in various gauges and colors for about $55 and did my own re-wire job including fuse block and volt...
    Post by: Syber4x4, Jul 22, 2011 in forum: Early CJ5 and CJ6 Tech
  4. Syber4x4
    Post

    Which Master Cylinder Brands are better

    I'm inclined to buy a new unit over a rebuilt one. With the same PN, could the Dorman be a re-branded Wagner ? there is a big spread on their...
    Post by: Syber4x4, Jul 22, 2011 in forum: Early CJ5 and CJ6 Tech
  5. Syber4x4
    Post

    which oil for the engine

    10w30 is rated up to 85 F while 10w40 is good for higher temps up to 105 F IIRC. So take your pick. Of course in the winter you will want a 0w or...
    Post by: Syber4x4, Jul 20, 2011 in forum: Early CJ5 and CJ6 Tech
  6. Syber4x4
    Thread

    Which Master Cylinder Brands are better

    Continuing the brake upgrade saga, I've done the research to determine which Master Cylinder would be usable when doing a frame mounted upgrade so...
    Thread by: Syber4x4, Jul 20, 2011, 8 replies, in forum: Early CJ5 and CJ6 Tech
  7. Syber4x4
    Post

    Auto Meter fuel gauge

    I had a similar issue with a new gauge but mine turned out to be a soggy float.
    Post by: Syber4x4, Jul 19, 2011 in forum: Early CJ5 and CJ6 Tech
  8. Syber4x4
    Thread

    Which washer on caliper banjo bolt?

    My calipers came with 2 copper crush washers... I assume they are for the banjo bolt connection, thye are sort of rounded and look like they will...
    Thread by: Syber4x4, Jul 14, 2011, 4 replies, in forum: Early CJ5 and CJ6 Tech
  9. Syber4x4
    Post

    Needed: Pics of heater ducts behind dash for 1959 CJ5

    I have the complete heater and the cardboard duct around here somewhere I took off my 66. Let me know if you need it. In Arizona we enjoy the cold...
    Post by: Syber4x4, Jul 14, 2011 in forum: Early CJ5 and CJ6 Tech
  10. Syber4x4
    Post

    Disc brake conversion, thicker inner race and snap ring

    Thanks but that is too much $$$ - I'm on social security and have to watch every cent now. I'll check the classifieds, thanks
    Post by: Syber4x4, Jul 13, 2011 in forum: Early CJ5 and CJ6 Tech
  11. Syber4x4
    Post

    Disc brake conversion, thicker inner race and snap ring

    Continuing to pound my head ...:dead horse: I made up a comparison spreadsheet with about 29 different part numbers shown as compatible for 65-76...
    Post by: Syber4x4, Jul 13, 2011 in forum: Early CJ5 and CJ6 Tech
  12. Syber4x4
    Post

    Disc brake conversion, thicker inner race and snap ring

    The Dorman and NAPA replacement M/C for a 77 K-10 uses a 1 1/8" dia. I know other things like weight will enter into the sizing but that should be...
    Post by: Syber4x4, Jul 12, 2011 in forum: Early CJ5 and CJ6 Tech
New Posts