Thanks for the info. I'll do some measuring on that one!
Hello everyone, I have limited posts, but read a lot here. I have been reading through everything I can find on carbs for the Buick v6 motors. I...
Just went for a drive in the jeep for a test run before I hit the road for the weekend. For fun, I tightened my clutch cable, (it was really...
^^^^ That is very similar. I will have to take a look at that when I open it up again.
I have been reading a lot about synchros. But it would grind a lot more if that was the case? Anyway, I will need to get back into it when I get...
it seems that this problem is fixed. In the guide here: http://www.willystech.com/wt/T90RebuildGuide/T90rebuild.htm It mentions 2 different...
That is what I have researched. That is what I will be checking next! Thanks.
The only thing that was changed in the transmission was that I put a longer shaft in it for the Buick V6 conversion. I am back to thinking that it...
I tried putting washers behind the bolt but it didn't seem to make a difference, I could try a couple more, But they are the same bolts I pulled...
Hey all, I have another T-90 trany that I am putting with my same t-case I have had for quite some time (dana 18 ). The issue: Both fit nicely...
That is a great idea, any local parts store have that? What exactly is that called you have there?
thanks all for the help! I figured it out... finally. My ampmeter was grounding out against the dash. The wires going through it had no insulators...
Facts: '50 CJ3A, Buick 231, HEI. I have some questions, but let me begin with what happened. I was up in the woods driving around and my buddy...
Separate names with a comma.