Steering column boot at firewall

Was there some sort of rubber boot or grommet that went around the steering column and against the inner firewall to keep out the elements? If so, who sells it? Thanks much, Pete.

 

Yep. This is usually one of the best places to try first. Calling them on the phone usually works best, rather than online.

http://www.walcks4wd.com/

 

http://www.willys.net/html/steering.html

 

Interesting. Those are NOS - AFAIK there is no current production. Used, NOS or fab.

 

I went with Mongo's post and here 4 years later the link works and my boot is on it's way. Thanks.

 

was there a bezel or ring that holds this part in place......
I need one for my 74 cj5

 

MTS sells new ones.
This is where I got mine. Cheap and fast. Had to call though.
Really good guy on the phone and was ordered and done in five minutes.

PN CJSCB-7275

http://www.mtscompany.com/miscjeep.htm

 

Also looking for one.
Good info thanks!

 

No, no bezel.

 

Seriously?

I would have thought there would be one for it as the clutch rod boot right next to it has a hold down ring.

Now that I look at the parts catalog, I see that it is just screws with washers

 

Nope. Just been there recently. Three screws. Parts book shows it too.

The clutch boot is paper-thin compared to the steering column boot. It needs a ring.

 

just ordered one through southwest jeep via MTS.
so ok,,, three screws and a couple washers for the hold down
thx
dave