1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Pitman arm

Discussion in 'Early CJ5 and CJ6 Tech' started by scott milliner, Jan 10, 2007.

  1. scott milliner

    scott milliner Master Fabricator

    I put a Saginaw Power Steering box on Baba Looey. I think it turns to fare. The wheels hit the stops before the steering box stops turning. Do you think I could put a shorter pitmen arm on there to solve this problem?:?
     
    scott milliner, Jan 10, 2007
    #1
  2. jayhawkclint

    jayhawkclint ΜΟΛΩΝ ΛΑΒΕ

    Re: Pitmen arm

    Is it necessarily a problem? Sounds like a symptom of the D25 axle, not the steering box. Might want to just keep it the way it is in case you swap out to the D30 someday.
     
    jayhawkclint, Jan 10, 2007
    #2
  3. scott milliner

    scott milliner Master Fabricator

    Re: Pitmen arm

    I could always put the old arm back on.
     
    scott milliner, Jan 10, 2007
    #3
  4. jeepen

    jeepen Member

    I would sugest you install a suport arm from the bottom of the steering box to the other side of the frame. that is if you dont have on all ready. you can make a neet one with a rod off a 350 a welder and a copple chuncks of steel.
     
    jeepen, Jan 12, 2007
    #4