1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

wiring question

Discussion in 'Flat Fender Tech' started by Gwillys, Sep 29, 2009.

  1. Sep 29, 2009

    Gwillys 1953 CJ3B

    Southington, Ct
    Jan 20, 2006
    i am trying to wire the signal stat 900 through the ez-wire fuse box to take advantage of the flashers that come with it. i can get the indicators to blink when the turn signal is on and the flasher can be heard clicking however when i apply the brakes the turn signals front and rear light up solid in stead of flashing. This makes sense since the s/t/t lights only have two filaments but is it really supposed to work like that?
  2. Sep 29, 2009

    duffer Rodent Power Sponsor

    Bozeman, MT
    Sep 17, 2009
    Stock wiring should have 2 leads going to the turn signal unit. One goes from the ignition switch through the flasher module and then to the turn signal unit. The second goes from the light switch, through stop light switch, and then to turn signal unit so flasher should be interupting the current from the stop light switch. Make sure these are not reversed.
  3. Sep 29, 2009
    Walt Couch

    Walt Couch sidehill Cordele, Ga. Sponsor

    cordele, Ga.
    Mar 29, 2007
    You should have all the right stuff for it to work properly. Do a search for sigstat 900 and look at the second post. It links to the wiring diagram that will help you.

Share This Page

New Posts