1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Wiring Harness

Discussion in 'Early CJ5 and CJ6 Tech' started by coonassjohn, Jun 17, 2019.

  1. Jun 20, 2019
    tomasinator

    tomasinator Member

    Redmond, WA
    Joined:
    Aug 26, 2015
    Messages:
    257
    I used a Painless kit. The fuse block looks like this:
    [​IMG]

    There's enough wire left over to wire up a second jeep.
     
  2. Jun 20, 2019
    timgr

    timgr Jeepin' Nerd 2020 Sponsor 2019 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    20,561
    Extra wire is a great thing to have on hand. Or put it up for sale for someone who wants to repair their existing harness. Could offset the purchase cost of your harness kit some ... (y)
     
  3. Jun 20, 2019
    Mcruff

    Mcruff Earlycj5 Machinist

    Albertville, AL
    Joined:
    Sep 22, 2002
    Messages:
    4,922
    Here is the EZ wire 12 circuit harness for $170.

    file.jpg
     
  4. Jun 20, 2019
    Buildflycrash

    Buildflycrash Member 2020 Sponsor

    Gulf Breeze FL...
    Joined:
    Jun 5, 2007
    Messages:
    1,141
    That’s in my Jeep as well. Only a few weeks old but all good so far.
     
  5. Jun 21, 2019
    Mike C

    Mike C Member

    Austin, TX
    Joined:
    Feb 19, 2007
    Messages:
    734
    I am also a very satisfied EZ Wire harness users. Like an early post, mine is the all black wire. When I bought the harness circa 2008, you had the option of all black wires (but they are labeled) or the colored wires and I thought all black was better suited to my A1 project.
     
  6. Jun 24, 2019
    jjdebarros

    jjdebarros Sponsor

    Spokane, WA
    Joined:
    Dec 26, 2017
    Messages:
    63
    Where on the firewall did you mount it?
     
  7. Jun 24, 2019
    Mcruff

    Mcruff Earlycj5 Machinist

    Albertville, AL
    Joined:
    Sep 22, 2002
    Messages:
    4,922
    Mine is mounted on the firewall slightly below the glove box, away from the factory heater and easy to get to with no steering column or anything near it. I use a magnetic light beside it if I need to see anything in the dark.
     
    jjdebarros likes this.
  8. Jun 24, 2019
    Buildflycrash

    Buildflycrash Member 2020 Sponsor

    Gulf Breeze FL...
    Joined:
    Jun 5, 2007
    Messages:
    1,141
    Inside firewall, driver side. May be in the way of hanging pedal mod in future - poor planning by me.
     
    jjdebarros likes this.

Share This Page

New Posts