1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Where can i get info on rebuilding the amc 20?

Discussion in 'Intermediate CJ-5/6/7/8' started by ehauff, Sep 9, 2004.

  1. Sep 9, 2004
    ehauff

    ehauff What? What? What?

    Cheyenne, Wy
    Joined:
    Oct 13, 2002
    Messages:
    71
    Need e real good walk through with specs on rebuilding the amc 20 and dana 30. Got new gears and plan on installing them this weekend but cant find any info on it. thanks in advanced.
     
    ehauff, Sep 9, 2004
    #1
  2. Sep 9, 2004
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,596
    The factory manual is usually the best.
     
    timgr, Sep 9, 2004
    #2
  3. Sep 9, 2004
    plunkinberry

    plunkinberry Member

    Canonsburg, PA
    Joined:
    Nov 22, 2002
    Messages:
    102
    I went to yahoo and googled ring and pinion install and found a LOT of information. Give a read and look at the factory manual too. An additional source of info. might be whereever you purchased the gears from...

    And, as always, ask away... there's a wealth of knowledge available here at ECJ5.

    Good luck.
     
    plunkinberry, Sep 9, 2004
    #3
  4. Sep 9, 2004
    sparky

    sparky Sandgroper Staff Member Founder

    Perth, WA
    Joined:
    Sep 20, 2002
    Messages:
    9,221
    Randy's Ring and Pinion website would be a good source of info I'd think.
     
    sparky, Sep 9, 2004
    #4
  5. Sep 9, 2004
    lynn

    lynn Time machine / Early CJ5 HR Rep Staff Member

    Huntingdon PA
    Joined:
    Sep 20, 2002
    Messages:
    3,437
    lynn, Sep 9, 2004
    #5
New Posts