1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Removing Shock Mounts

Discussion in 'Intermediate CJ-5/6/7/8' started by rejeep, Oct 11, 2019.

  1. Oct 21, 2019
    rejeep

    rejeep Well-Known Member Sponsor 2019 Sponsor

    Rochester, NY
    Joined:
    Nov 5, 2009
    Messages:
    1,517
    you know I didn't check, but then again, I didn't notice any issues when I put the driver side tire back on and swung the jeep around the block before pulling it back in the garage.

    Ill pay more attention tonight..
     
  2. Oct 21, 2019
    RATTYFLATTY

    RATTYFLATTY I think you need a little more throttle

    Central MN
    Joined:
    Oct 23, 2007
    Messages:
    370
    Same issue I ran into, ended up cutting my fender some. With stock width(narrow)axles I don't believe you can run wide trac mounts.

    My end result.


    5212E54C-.jpg

    IMG_1402 (2).PNG
     
    Last edited: Oct 21, 2019
    Twin2 likes this.
  3. Oct 21, 2019
    rejeep

    rejeep Well-Known Member Sponsor 2019 Sponsor

    Rochester, NY
    Joined:
    Nov 5, 2009
    Messages:
    1,517
    I feared the worse so I ran home at lunch today to take a look at the jeep..
    I don't see how this will be a problem.
    Driver side looks OK to me.

    [​IMG][/url
    ]

    [​IMG][/url
    ]

    [​IMG][/url
    ]
     
  4. Oct 21, 2019
    RATTYFLATTY

    RATTYFLATTY I think you need a little more throttle

    Central MN
    Joined:
    Oct 23, 2007
    Messages:
    370
    The issue you will have and you won't see it till it's too late is when you compress one side and drop the other. Not saying you will have this problem but that's a hole you can't fix with a plug.
     
  5. Oct 21, 2019
    timgr

    timgr Jeepin' Nerd Sponsor 2019 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    20,179
    Looks the same.

    shockmount.png
     
  6. Oct 23, 2019
    rejeep

    rejeep Well-Known Member Sponsor 2019 Sponsor

    Rochester, NY
    Joined:
    Nov 5, 2009
    Messages:
    1,517
    Done and bolted in..
    Suspension flexed and cycled...

    No interference :bananatool:
     
    RATTYFLATTY and Norcal69 like this.

Share This Page

New Posts