1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Ramsey, but which winch?

Discussion in 'Early CJ5 and CJ6 Tech' started by one2manyjps, Feb 24, 2010.

  1. Feb 24, 2010
    one2manyjps

    one2manyjps Member

    hot springs,...
    Joined:
    Jan 22, 2008
    Messages:
    76
    Can anyone ID the model of this winch?
    It is on a M170 I've been looking at.
    Would like to know if parts are available before purchase.:)
    Thanks, Bob in Arkansas
    [​IMG]

    [​IMG][​IMG]
     
  2. Feb 24, 2010
    Howard Eisenhauer

    Howard Eisenhauer Super Moderator Staff Member

    Tantallon, Nova...
    Joined:
    Nov 22, 2003
    Messages:
    5,960
    Wow, that's an oldie.

    I've never seen a picture of one like that on the Ramsey web site but it wouldn't hurt to send them a pic & ask. i would suspect that outside of the gear set or clutch parts that the bearings & seals would be stock catalog stuff available through any supply house.

    H.
     
  3. Feb 24, 2010
    kaiser_willys

    kaiser_willys Well-Known Member

    Joined:
    Jan 7, 2007
    Messages:
    1,524
    I had one that looked like it alot, well almost identical only difference i see is mine ran directly off of the crankshaft, gave it away. pull the fill plug out and inspect the condition of the bull gear and if you can see it work check that the shaft that goes thru the drum isnt bent, should be no clutch parts in that one just the gear set and 2 bearings on the worm gear shaft, rest are brass bushings. cant see it in the picture but i would bet it has a band style brake on the passanger side with a lever to hold it
     
  4. Feb 24, 2010
    kaiser_willys

    kaiser_willys Well-Known Member

    Joined:
    Jan 7, 2007
    Messages:
    1,524
    driver side of the drum has been broken:rofl:
     
  5. Feb 24, 2010
    JohnyJeep

    JohnyJeep BLOWING A XING NEAR U@2AM

    Beautiful Cody WY
    Joined:
    Sep 22, 2002
    Messages:
    513
    The PTO looks like one I have for sale

    [​IMG]

    [​IMG]
     
  6. Feb 24, 2010
    Vanguard

    Vanguard Chief Cook and Bottlewasher Staff Member

    Brighton, MI USA
    Joined:
    Aug 30, 2006
    Messages:
    1,614
  7. Feb 24, 2010
    one2manyjps

    one2manyjps Member

    hot springs,...
    Joined:
    Jan 22, 2008
    Messages:
    76
    PT1-J on the pto, but an antique winch... Boy! :rofl: At least it does work.

    Thanks for the suggestions and that's what I will do.
    Bob
     
  8. Feb 24, 2010
    kaiser_willys

    kaiser_willys Well-Known Member

    Joined:
    Jan 7, 2007
    Messages:
    1,524
    for what its worth, my winch had the numbers stamped in to the alumnium housing, may clean it up and find them
     

Share This Page

New Posts