1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Parts List...

Discussion in 'Jeep Trailer Tech' started by Chris Insull, Feb 22, 2006.

  1. Feb 22, 2006
    Chris Insull

    Chris Insull All roads lead me back to the beach... 2020 Sponsor 2019 Sponsor

    Misawa, Japan...
    Joined:
    Sep 22, 2002
    Messages:
    790
    Well, it'a about time to gather up some of the bit/ piece parts for the BT3-C restification. Does anyone have a "ready reference" P/N listing for: wheel bearings and seals, replacement springs and shackles? Thanks in advance...:beer:
     
  2. Feb 22, 2006
    MOP

    MOP Active Member

    Manhattan, KS
    Joined:
    Sep 25, 2003
    Messages:
    1,133
    Part# Description Qty Price Total
    384228 (18270.01) 2) Spring Bolt (Greasable Design) 2 $3.25 $6.50
    808460 (18204.04) U-Bolt: 2-3/4" w x Approx. 6" L x 7/16" thread, fit most 41-71 CJ front over Axle Tube 4 $3.50 $14.00
    339372 Nut, for 7/16" thread U-Bolts 8 $0.99 $7.92
    802061 (18270.12) Shackle, Left Hand Thread, No Bushings Required, to be used on Left Front and Right Rear 1 $8.00 $8.00
    802062 (18270.13) Shackle, Right Hand Thread, No Bushings Required, to be used on Right Front and Left Rear 1 $8.00 $8.00


    The wheel bearings and seals I got at NAPA. I don't have the number in my mind, but they are stamped on the bearings when you pull the old ones out. The springs are the same as an MB or CJ2a/3A/3B
     
  3. Feb 23, 2006
    Chris Insull

    Chris Insull All roads lead me back to the beach... 2020 Sponsor 2019 Sponsor

    Misawa, Japan...
    Joined:
    Sep 22, 2002
    Messages:
    790
    Thanks, Mike!!
     
  4. Feb 24, 2006
    schardein

    schardein Low Range Therapy

    Success, MO
    Joined:
    Aug 11, 2003
    Messages:
    554
    Chris, here is some info I wrote down when I was rebuilding my 416 trailer. Mostly this is a list of the bolts and nuts I needed. The numbers are (how many) bolt diameter x bolt length. There are some differences from a m100 to a m416, such as the front frame extensions are held on by u-bolts versus just nuts and bolts (is that right, can't remember now) on a M100. Not sure of how a bt3c would compare.

    M416 TRAILER

    1. SHOCKS 10.37" X 16.43"(actual-11 5/8 compressed, 15 installed, 17 5/8 extended)(31702H)
    2. LEAF SPRINGS 36 1/4" EYE TO EYE 1 3/4" WIDE

    7/8" WRENCH FOR LEAF SPRING BOLTS
    5/8" WRENCH FOR NUTS ON FRAME EXTENSION U-BOLTS
    5/8" WRENCH FOR LEAF SPRING U-BOLTS

    LEAF SPRING U-BOLTS 2 3/8" wide by 6"-7" LONG
    FRAME U-BOLTS 7/16" X 4"

    LANDING LEG (2) 1/2" X 1 3/4"
    FRAME EXTENSIONS (4) 1/2" X 1 1/2"
    PINTLE MOUNT (4) 7/16" X 1"
    VARIOUS FRAME BOLTS (20) 3/8" X 1"
    BRAKE CABLE PIN (2) 1/4" X 5/8" HOLE FOR COTTER AT 1/2"
    BRAKE CABLE CLAMP (2) 5/16" X 1 1/4"
    BRAKE CABLE CLIP (4) 5/16" X 1"
    SPRING U-BOLTS 7/16"
    LEAF SPRING BOLTS (2) 9/16" X 2 7/8"
    FRAME U-BOLT NUTS (4) 7/16"
    LEG PIVOT (1) 3/4" X 3 1/2"
    CHAIN BOLT (1) 3/4" X 5 1/2"
     
  5. Feb 24, 2006
    schardein

    schardein Low Range Therapy

    Success, MO
    Joined:
    Aug 11, 2003
    Messages:
    554
    Chris, I also have a partial printout of the military service manual for a M100/416, if you want I could scan it and send it to you. Let me know, it is kinda long and might not get to scanning until the weekend. You might be able to do a search and find an online copy of it TM 9-2330-251-14&P
     
  6. Feb 24, 2006
    schardein

    schardein Low Range Therapy

    Success, MO
    Joined:
    Aug 11, 2003
    Messages:
    554
    Holy smokes, the search works, first thing that comes up is a PDF of it. 268 pages, I forgot it was so long!!! Wow, I only printed off about 20 of the 268 to keep on hand.
     
  7. Mar 5, 2006
    atavuss

    atavuss New Member

    Joined:
    Jan 5, 2006
    Messages:
    24
    CR seal # 21101

    timken bearing 18590

    Timken cup 18520

    inner and outer bearings and cups take the same number
     

Share This Page

New Posts