1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Pad post

Discussion in 'Early CJ5 and CJ6 Tech' started by blevisay, Aug 16, 2009.

  1. Aug 17, 2009
    kaiser_willys

    kaiser_willys Well-Known Member

    Joined:
    Jan 7, 2007
    Messages:
    1,524
    nothing to over heat in my pto, mine is the one that just comes straight out the back like for the pto on agrijeeps, just a shaft, housing two bearings, a slider gear and a yoke. the rest is homemade, looks like a roll back set up
     
  2. Aug 17, 2009
    uncamonkey

    uncamonkey Member

    Greeley CO
    Joined:
    Jun 2, 2009
    Messages:
    2,104
    No worm gears?
     
  3. Aug 17, 2009
    kaiser_willys

    kaiser_willys Well-Known Member

    Joined:
    Jan 7, 2007
    Messages:
    1,524
    not in the pto, the winch has planetary gears
     
  4. Aug 17, 2009
    uncamonkey

    uncamonkey Member

    Greeley CO
    Joined:
    Jun 2, 2009
    Messages:
    2,104
    Huh, a bit differant then.
     
  5. Aug 17, 2009
    jpflat2a

    jpflat2a what's that noise?

    Riverside CA
    Joined:
    Jul 30, 2003
    Messages:
    8,018
    none posts
    zip
    nada
    zero
     
  6. Aug 17, 2009
    kaiser_willys

    kaiser_willys Well-Known Member

    Joined:
    Jan 7, 2007
    Messages:
    1,524
    well its all in the winch its self, small gear running inside of 3 gears running inside of a large gear, the small gear runs inside of 3 small gears placed equall apart kinda like 2, 10 and 6 o'clock that run on the inside of a larger gear that drives the spool
     
  7. Aug 17, 2009
    uncamonkey

    uncamonkey Member

    Greeley CO
    Joined:
    Jun 2, 2009
    Messages:
    2,104
    Noticed that a few pages back...
     
  8. Aug 17, 2009
    GreenGhost

    GreenGhost Never give up!

    Linglestown, PA
    Joined:
    Apr 6, 2008
    Messages:
    289
    So what Is/or was a pad post? Just getting a higher number i suppose?
     
  9. Aug 17, 2009
    jpflat2a

    jpflat2a what's that noise?

    Riverside CA
    Joined:
    Jul 30, 2003
    Messages:
    8,018
    if you get hurt
    they give you cash
    which is just as good as money
     
  10. Aug 17, 2009
    kaiser_willys

    kaiser_willys Well-Known Member

    Joined:
    Jan 7, 2007
    Messages:
    1,524
    thinking that came down from the big cheese, no biggie, just another #
     
  11. Aug 17, 2009
    uncamonkey

    uncamonkey Member

    Greeley CO
    Joined:
    Jun 2, 2009
    Messages:
    2,104
    I understand planetary gearing, it's just the 90 deg turn that confuses me.
    Just a pinion gear set up?
     
  12. Aug 17, 2009
    jpflat2a

    jpflat2a what's that noise?

    Riverside CA
    Joined:
    Jul 30, 2003
    Messages:
    8,018
    it tells us all how much time we spend on this site
    waaaay too much time somtimes...
     
  13. Aug 17, 2009
    kaiser_willys

    kaiser_willys Well-Known Member

    Joined:
    Jan 7, 2007
    Messages:
    1,524
    you got it
     
  14. Aug 17, 2009
    uncamonkey

    uncamonkey Member

    Greeley CO
    Joined:
    Jun 2, 2009
    Messages:
    2,104
    Better than some sites I've seen, less chance of a virus too.
     
  15. Aug 17, 2009
    kaiser_willys

    kaiser_willys Well-Known Member

    Joined:
    Jan 7, 2007
    Messages:
    1,524
    kinda like that , worm gear works in what is called a bull gear, same effect just different, teeth are much more course, and the bull gear is usually made of brass, ring and pinnion are far more superrior, but more expensive to make, and the tollerances are tighter, with the hyd setup there is no need for the 90 deg with the planetary set up, but they do make them boath ways, the drawback with planetary is the auto brake, the worm setup works better for power out
     
  16. Aug 17, 2009
    kaiser_willys

    kaiser_willys Well-Known Member

    Joined:
    Jan 7, 2007
    Messages:
    1,524
    oh well folks, its that time again, bed time:mehh: gotta go do it again in the morning :rofl: good chatting with YA'ALL
     
  17. Aug 17, 2009
    uncamonkey

    uncamonkey Member

    Greeley CO
    Joined:
    Jun 2, 2009
    Messages:
    2,104
    OK, got it, was still thinking of the rear winch set up with a drive shaft.
    You have the same type winch used on tow trucks, cranes etc., thus the planetary set up.
    Just had to think a little more modern.
     
  18. Aug 18, 2009
    dohc281

    dohc281 It is what it is.

    Laurel Springs, N.J.
    Joined:
    Dec 30, 2004
    Messages:
    605
    First pad of the day.
     
  19. Aug 18, 2009
    Hansh

    Hansh Going Mobile

    SE Wisconsin
    Joined:
    Dec 7, 2004
    Messages:
    425
    Hmmmmmm.......
     
  20. Aug 18, 2009
    Smokeater

    Smokeater Sponsor

    Browns Summit, NC
    Joined:
    Jun 1, 2009
    Messages:
    125
    ???????????????????????
     

Share This Page

New Posts