1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

'nother pertronix thread

Discussion in 'Flat Fender Tech' started by neptco19, Mar 19, 2006.

  1. Mar 19, 2006
    neptco19

    neptco19 That guy....

    Athens, GA
    Joined:
    Sep 26, 2003
    Messages:
    1,381
    My distributor is absoulte crud. The weights are all rusted up and cruded, plus the springs were MIA. I'd like to replace it but I was wondering if there was a supplier that offered a dist. with the pertronix already installed. I looked through the part suppliers listed in the that thread but didnt have any luck.
     
    neptco19, Mar 19, 2006
    #1
  2. Mar 19, 2006
    w3srl

    w3srl All-around swell dude Staff Member

    Port Orange, FL
    Joined:
    Nov 6, 2002
    Messages:
    4,275
    You might go straight to the source and contatc Genessee Products directly. I do know that they will attempt to retrofit your distributor for a fee, if it isn't one of the ones thatey already have a kit for; mebbe they'll do the full whammy on yours!
     
    w3srl, Mar 19, 2006
    #2
  3. Mar 20, 2006
    Griff

    Griff Member

    Sylacauga ,Alabama
    Joined:
    Oct 11, 2004
    Messages:
    66
    Ordered a distr. from kaiser willys that fit my 60 CJ 3B with original f-head engine. i then ordered the petronix for it . The guys at kaiser were great. Told me the exact distr. I had and what petronix conversion I needed
     
    Griff, Mar 20, 2006
    #3
  4. Mar 20, 2006
    neptco19

    neptco19 That guy....

    Athens, GA
    Joined:
    Sep 26, 2003
    Messages:
    1,381
    I called Genesse products today and they can send a new dist. with the pertronix installed but they wernt going to be able to get one to me quick enough for this weekend. So I went ahead and just got a new dist. for now and will add the pertronix later on.
     
    neptco19, Mar 20, 2006
    #4
  5. Mar 20, 2006
    w3srl

    w3srl All-around swell dude Staff Member

    Port Orange, FL
    Joined:
    Nov 6, 2002
    Messages:
    4,275
    8)
     
    w3srl, Mar 20, 2006
    #5
New Posts