1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Need a new input bearing! where to get one!

Discussion in 'Early CJ5 and CJ6 Tech' started by avnet, Sep 21, 2004.

  1. Sep 21, 2004
    avnet

    avnet New Member

    Mesa, AZ
    Joined:
    Aug 24, 2004
    Messages:
    41
    Sorry if I am wrong on this. but i cracked the input bearing while pulling out the engine.
    I am not sure if this is what you call it so let me tell you where the broken part is located:

    Its the bearing that slides into the flyhweel/engine where the transmision shaft is inserted. I have T-14 A trans mission but am unsure of the tooth count.

    my question is where can i find one of these? And how hard are they to find?

    thanks everyone.

    brendan

    buick 225 V6
    t-14-A trans
    d18 t/c with warn overdrive
     
    avnet, Sep 21, 2004
    #1
  2. Sep 21, 2004
    oldjeep

    oldjeep Sisyphus at work

    Victoria, MN
    Joined:
    Sep 19, 2003
    Messages:
    267
    It's called a pilot bearing. Should be able to get/order from any parts store
     
    oldjeep, Sep 21, 2004
    #2
  3. Sep 21, 2004
    SandhillMike

    SandhillMike Moderator

    Archer, Fla
    Joined:
    Oct 25, 2003
    Messages:
    246
    I got one at NAPA, but did have to have the center hole reamed to fit,
     
    SandhillMike, Sep 21, 2004
    #3
  4. Sep 21, 2004
    Warloch

    Warloch Did you say Flattie??? Staff Member

    Falcon, CO
    Joined:
    Mar 4, 2003
    Messages:
    5,470
    You should be able to ask for one for a 70 CJ with the T-14... However, I won't go into my rant on parts people and wanting to know what the color is for a brake pad, I would take the nose cone down with me and the old TO to match it to.

    :stout:
     
    Warloch, Sep 21, 2004
    #4
New Posts