1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Motor Mount

Discussion in 'Early CJ5 and CJ6 Tech' started by iharding, Feb 6, 2014.

  1. Feb 6, 2014
    iharding

    iharding Quitter

    Tacoma, WA
    Joined:
    Feb 24, 2013
    Messages:
    356
    [​IMG]
    This doesn't look right. That bolt is pulled out and wedged such that I can't turn it back in. I as some the hole is stripped too. Ugh.



    Sent from my iPhone using Tapatalk
     
    iharding, Feb 6, 2014
    #1
  2. Feb 7, 2014
    iharding

    iharding Quitter

    Tacoma, WA
    Joined:
    Feb 24, 2013
    Messages:
    356
    Well, the hole in the block is stripped so I assume I need to put in a helicoil repair. I am not very good at jobs involving heavy greasy bits. Can anyone recommend a shop or individual in the Tacoma area?


    Sent from my iPhone using Tapatalk
     
    iharding, Feb 7, 2014
    #2
  3. Feb 7, 2014
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,596
    The other possibility is to drill it out the next size larger and tap the hole. Just don't drill too deep ... should be safe there though, with only iron and cranckcase behind the hole.
     
    timgr, Feb 7, 2014
    #3
New Posts