1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Master cyl

Discussion in 'Early CJ5 and CJ6 Tech' started by blevisay, Mar 9, 2005.

  1. Mar 9, 2005
    blevisay

    blevisay Oh Noooooooooooooooo! Staff Member

    Portland Tn.
    Joined:
    Sep 20, 2002
    Messages:
    4,350
    Would a dual frame mount from a 67 fit a 60?
     
    blevisay, Mar 9, 2005
    #1
  2. Mar 9, 2005
    blevisay

    blevisay Oh Noooooooooooooooo! Staff Member

    Portland Tn.
    Joined:
    Sep 20, 2002
    Messages:
    4,350
    anyone?
     
    blevisay, Mar 9, 2005
    #2
  3. Mar 9, 2005
    Glenn

    Glenn Kinda grumpy old man Staff Member

    Apopka, Fl
    Joined:
    Sep 21, 2002
    Messages:
    12,377
    Wasn't there a bit of difference in the mounting, and didn't Herm have a kit or something for that?
     
    Glenn, Mar 9, 2005
    #3
  4. Mar 9, 2005
    Mcruff

    Mcruff Earlycj5 Machinist

    Albertville, AL
    Joined:
    Sep 22, 2002
    Messages:
    5,349
    Sent photos Bill!!
     
    Mcruff, Mar 9, 2005
    #4
  5. Mar 9, 2005
    w3srl

    w3srl All-around swell dude Staff Member

    Port Orange, FL
    Joined:
    Nov 6, 2002
    Messages:
    4,275
    It'll fit Billy, but you have to cut the old MC mount out of the frame and drill the mounting holes for the new one. Good upgrade BTW, going to the dual-circuit system. If you are keeping the drums all the way around, use KRAGE PN:8134270 since it has the brake line ports on the passenger side where you can get to them.

    [​IMG]
     
    w3srl, Mar 9, 2005
    #5
New Posts