1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Front Shock Mounts

Discussion in 'Intermediate CJ-5/6/7/8' started by rejeep, Sep 23, 2019.

  1. Sep 23, 2019
    rejeep

    rejeep Well-Known Member 2021 Sponsor 2020 Sponsor

    Rochester, NY
    Joined:
    Nov 5, 2009
    Messages:
    1,629
    on a 72-75 chassis I noticed the front shock mounts are different than what is being offered by Crown or Omix as 45-75 compatible..

    Has anybody done anything different in the front for better shock travel while still staying relatively stock?

    does anybody have a part number for the 72-75 upper mount since I'm fairly good at finding unicorn poop.
     
  2. Sep 23, 2019
    timgr

    timgr We stand on the shoulders of giants. 2021 Sponsor 2020 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    22,816
    Book says it's an 805635. That's an old number, maybe pre-1950-ish. Same as what you were finding?
     
  3. Sep 23, 2019
    RATTYFLATTY

    RATTYFLATTY I think you need a little more throttle

    Central MN
    Joined:
    Oct 23, 2007
    Messages:
    464
    I did this upper mount mod for some better options. Pretty easy with a chunk of 1.5" x 3" tube and a bolt.

    IMG_1391 (2).JPG IMG_1402 (2).PNG
     
    txtoller likes this.
  4. Sep 23, 2019
    '74Renegade

    '74Renegade Active Member

    Fair Oaks, CA
    Joined:
    Sep 1, 2005
    Messages:
    1,220
    I pulled some from a Wagoneer, same as later CJs I think. Drilled a few hole's and bolted them on. Of course I had to move the lower shock mount up to the axle tube.
     

Share This Page

New Posts