1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Flat Towing Guide

Discussion in 'Early CJ-5 and CJ-6 Tech' started by Focker, Sep 7, 2017.

Thread Status:
Not open for further replies.
  1. Sep 7, 2017
    Focker

    Focker Ran when parked... Runs while moving. Staff Member Sponsor

    Tri-Cities WA
    Joined:
    Aug 18, 2014
    Messages:
    5,520
    Gathered from the gurus here. Thread is locked and not open for discussion. If this doesn't answer your question(s)...Please search the many previous threads regarding this topic. All new threads will be deleted upon discovery. PM me if I need to add something.


    Standard Option:
    D-18
    1 - Unlock front hubs if equipped, otherwise remove front drive shaft.
    2 - Remove rear drive shaft (recommended)
    OR
    Place transmission in gear and transfer case in neutral. Ensure fluids are at proper levels.

    D-300 or D-20 when towing long distances:
    1 - Unlock front hubs if equipped, otherwise remove front drive shaft.
    2 - Remove rear drive shaft.

    Ultimate Option:
    Install rear locking hubs, otherwise known as Full Floating rear axle. Unlock all 4 hubs and go.

    Tow Lighting Options:
    Here is a good thread for modifying your Jeep's wiring and using it's tail lights with a 4 pin plug -
    Wiring Tow Lights
     
    mrtii, Glenn and OzFin like this.
Thread Status:
Not open for further replies.

Share This Page

New Posts