1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

distributor cap

Discussion in 'Early CJ5 and CJ6 Tech' started by chuck123wapati, Jun 18, 2008.

  1. Jun 18, 2008
    chuck123wapati

    chuck123wapati Member

    wyoming
    Joined:
    Jun 18, 2008
    Messages:
    761
    I am having trouble finding the right cap for my distributor,its a delco but holddown clips dont line up with any of the caps spec'd for it. Any one else have that problem?
     
  2. Jun 18, 2008
    chuck123wapati

    chuck123wapati Member

    wyoming
    Joined:
    Jun 18, 2008
    Messages:
    761
    i have just found on an earlier thread that there were two delco distributors used but did not give any part numbers. said they found the right cap under marine use. does anyone know what part # i need? I dont have the easy one of course. buick 225 odd fire
     
  3. Jun 18, 2008
    jpflat2a

    jpflat2a what's that noise?

    Hermosa, SD
    Joined:
    Jul 30, 2003
    Messages:
    8,513
    Jeep used the Delco #s for part numbers:
    any Delco numbers on your distibutor ?
    dist # 1110376 used Delco cap # 1967286 (most common)
    dist #s 1110322 and 1110342 use Delco cap # 1957693

    if no one else jumps in with a Standard number or equivalent, maybe a local parts house can cross the original numbers for you.
     
  4. Jun 19, 2008
    chuck123wapati

    chuck123wapati Member

    wyoming
    Joined:
    Jun 18, 2008
    Messages:
    761
    woohoo thanks for your help after only six hours on the net I have found out by luck only the same info . It seems that they changed between 67 and 68. I was looking for a cap for a 68. finally found a match to mine on ebay, when i looked up the number on partsamerica it was for a 67jeep
    neihoff dr 61 (67) or dr61b (68). thanks for your time and effort.

    BUT I ALSO FOUND A COOL FORUM see you in the mud.
     
New Posts