1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Dauntless Manifold Question

Discussion in 'Early CJ5 and CJ6 Tech' started by rejeep, Aug 9, 2018.

  1. Aug 9, 2018
    rejeep

    rejeep Well-Known Member 2021 Sponsor 2020 Sponsor

    Rochester, NY
    Joined:
    Nov 5, 2009
    Messages:
    1,629
    does anybody know the size of the water port opening where the temp sensor goes in?

    I need to get a reducer..
     
  2. Aug 9, 2018
    Focker

    Focker That's a terrible idea...What time? Staff Member 2021 Sponsor 2020 Sponsor

    Tri-Cities WA
    Joined:
    Aug 18, 2014
    Messages:
    7,436
  3. Aug 9, 2018
    rejeep

    rejeep Well-Known Member 2021 Sponsor 2020 Sponsor

    Rochester, NY
    Joined:
    Nov 5, 2009
    Messages:
    1,629
    searched and found that... i just cant believe its 3/8 NPT...
    i don't think that's correct
     
  4. Aug 9, 2018
    rejeep

    rejeep Well-Known Member 2021 Sponsor 2020 Sponsor

    Rochester, NY
    Joined:
    Nov 5, 2009
    Messages:
    1,629
    my issue is i need to find an adapter..
    trying to retain the stock land rover sender 5/8 UNF
    i have a feeling the dauntless manifold opening is 1/2 NPT..

    should be that easy.... in theory...
     
  5. Aug 9, 2018
    Focker

    Focker That's a terrible idea...What time? Staff Member 2021 Sponsor 2020 Sponsor

    Tri-Cities WA
    Joined:
    Aug 18, 2014
    Messages:
    7,436
    You can see the adapter. I'm sorry, but I don't have any records of the one I bought.
    [​IMG]
     
  6. Aug 9, 2018
    rejeep

    rejeep Well-Known Member 2021 Sponsor 2020 Sponsor

    Rochester, NY
    Joined:
    Nov 5, 2009
    Messages:
    1,629
    ahh ok.. were talking different ports..

    the one close to the thermostat housing... i have a coolant line back there..
     
  7. Aug 9, 2018
    colojeepguy

    colojeepguy Colorado Springs

    At the foot of...
    Joined:
    Apr 4, 2010
    Messages:
    5,566
    Pretty sure that it's 1/2" NPT (pipe thread).
    Remember that pipe thread size have nothing to do with the actual thread size, a 1/2 pipe thread is probably close to 1" diameter.
     
  8. Aug 9, 2018
    Focker

    Focker That's a terrible idea...What time? Staff Member 2021 Sponsor 2020 Sponsor

    Tri-Cities WA
    Joined:
    Aug 18, 2014
    Messages:
    7,436
    Copy. Sorry for the confusion.
     
  9. Aug 10, 2018
    Wenaha

    Wenaha Member

    West Coast
    Joined:
    Feb 6, 2014
    Messages:
    415
    are you putting a Dauntless in a LR?
     
  10. Aug 11, 2018
    rejeep

    rejeep Well-Known Member 2021 Sponsor 2020 Sponsor

    Rochester, NY
    Joined:
    Nov 5, 2009
    Messages:
    1,629
    :whistle:
    225 Build
     

Share This Page

New Posts