1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Dana 25 Axle

Discussion in 'Early Jeep Restoration and Research' started by TjWheelin85, Dec 3, 2004.

  1. Dec 3, 2004
    TjWheelin85

    TjWheelin85 New Member

    Reisterstown, MD
    Joined:
    Nov 30, 2004
    Messages:
    23
    Hey ya'll.

    I have a Dana 25 front axle on my 52 M38A1 Willy's ORIGINAL. I have purchased a Dana 30 NT off a 79 with disk brakes that is overall stronger. Now i'm wondering what a Dana 25 goes for recently. The only work i've done to the axle is had to replace the shafts with Dana 27 shafts which i spent 100 bucks on. Other than that it has everything original and stock which is:

    5:38 Ring and Pinion gears OPEN DIFF
    I THINK 8" drum brakes (size might be incorrect)
    SUA and SOA 2" spring pad setup
    and 10 spline Dana 27 shafts (which are practically the same as a Dana 25) and i replaced most of the brake lines (the ones that go across the axle) and extended goodrich stainless steel brake lines that go up to the frame)

    Tell me what ya'll think i could get for it, i was thinking maybe 125 but i might be a little high, even though it is in good condition i doubt there is much of a market for them anymore. If not, it will get parted and chopped.

    Alex
     
    TjWheelin85, Dec 3, 2004
    #1
  2. Dec 3, 2004
    sparky

    sparky Sandgroper Staff Member Founder

    Perth, WA
    Joined:
    Sep 20, 2002
    Messages:
    9,221
    9" Drums. Those are bad enough without being 8" R) ;)

    Didja check E-bay yet for prices?

    These axles are pretty common but if you find someone in your area in need...
     
    sparky, Dec 3, 2004
    #2
  3. Dec 4, 2004
    Hippo393

    Hippo393 Jeepless

    Charlotte, NC
    Joined:
    Sep 22, 2002
    Messages:
    1,130
    I'd suggest yanking the axle shafts and selling them independently of the D25. That's where the $$ is in the axle, and you can even ship those country-wide. IMO it's your best chance of recouping your investment. :beer:
     
    Hippo393, Dec 4, 2004
    #3
  4. Dec 4, 2004
    Boyink

    Boyink Super Moderator Staff Member

    Tulsa, OK
    Joined:
    Sep 20, 2002
    Messages:
    6,197
    See my reply in your other thread.
     
    Boyink, Dec 4, 2004
    #4
  5. Dec 4, 2004
    TjWheelin85

    TjWheelin85 New Member

    Reisterstown, MD
    Joined:
    Nov 30, 2004
    Messages:
    23
    what other thread? haha
     
    TjWheelin85, Dec 4, 2004
    #5
  6. Dec 7, 2004
    w3srl

    w3srl All-around swell dude Staff Member

    Port Orange, FL
    Joined:
    Nov 6, 2002
    Messages:
    4,275
    Shipping is what kills any profit in selling a whole axle. That, and the fact that everyone who 'starts' to build a rock/mud crawler seems to immediately discard the 25/27 axle. They're far from rare.

    I'm with Hippo on this one, sorry.
     
    w3srl, Dec 7, 2004
    #6
  7. Dec 7, 2004
    jpflat2a

    jpflat2a what's that noise?

    Hermosa, SD
    Joined:
    Jul 30, 2003
    Messages:
    8,524
    like said above, part it out for max profit potential
    I have 4 housings lying around right now; 2 D25s and 2 D27s; not worth much unless someone bent one
     
    jpflat2a, Dec 7, 2004
    #7
New Posts