1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Bell Housing Id

Discussion in 'Early CJ5 and CJ6 Tech' started by fyrmn, Sep 6, 2018.

  1. Sep 6, 2018
    fyrmn

    fyrmn Member 2023 Sponsor 2022 Sponsor

    High Desert AZ
    Joined:
    Apr 29, 2006
    Messages:
    198
    FullSizeRender.jpg 1956 CJ6 I recently purchased, after some research I believe this is a CJV35U bell housing. Is this correct? Is it possible this is original or has something been swapped out? Is there a cover available for the hole?Still has the F4 and T90
    Thanks in advance Paul
     
    fyrmn, Sep 6, 2018
    #1
  2. Sep 6, 2018
    Twin2

    Twin2 not him 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Virginia Beach, VA
    Joined:
    Apr 28, 2011
    Messages:
    5,424
    someone along the jeeps life span . busted off the side of bell . there should only be a hole where the cable passes through
     
    Twin2, Sep 6, 2018
    #2
  3. Sep 6, 2018
    fyrmn

    fyrmn Member 2023 Sponsor 2022 Sponsor

    High Desert AZ
    Joined:
    Apr 29, 2006
    Messages:
    198
    FullSizeRender 3.jpg I should also mention it has a sheet metal cover on the right side directly opposite the hole you see for the clutch arm possibly same hole size
    Like this bell housing
     
    fyrmn, Sep 6, 2018
    #3
New Posts