1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Any Pics of Brake Adjustable Proportion Valve??

Discussion in 'Early CJ5 and CJ6 Tech' started by DanStew, Sep 4, 2004.

  1. Sep 4, 2004
    DanStew

    DanStew Preowned Merkin salesman Staff Member

    Lexington, South...
    Joined:
    Sep 22, 2002
    Messages:
    4,585
    Well i got my front brakes connected. I cleaned up the plumbing to get everything nice looking. I have the wilwood residual valve inline to the front brakes (disc) And i had a rear adjsutable proportion valve that i never installed, so now i will put it on. I am looking for any pics of how you guys mounted you proportion valve so i can get some ideas to do it. Also so you think i need a residual valve for my rear brakes?? they are disc, i didnt put one on before and it worked fine. i was thinknig i could trick the rear brakes by adjusting the proportion valve to give a bit more pressure to the rear brakes.

    Thanks for any help!!!
     
    DanStew, Sep 4, 2004
    #1
  2. Sep 4, 2004
    oldjeep

    oldjeep Sisyphus at work

    Victoria, MN
    Joined:
    Sep 19, 2003
    Messages:
    267
    No picture, but mines just mounted to the side of the frame with the knob facing up. Once you get it set, there's no reason to ever touch it again. I don't run any RP valves with my 4 wheel disc setup, but I have a firewall mounted reservoir so gravity does it for me.
     
    oldjeep, Sep 4, 2004
    #2
New Posts