1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Aftermarket Bop Bellhousing?

Discussion in 'Early CJ5 and CJ6 Tech' started by Peter Dorey, Sep 30, 2021.

Page 2 of 2
  1. Oct 10, 2021
    Fireball

    Fireball Well-Known Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Pullman, WA
    Joined:
    Feb 9, 2018
    Messages:
    5,719
    As far as I understand, V6 Jeeps (with the exception of the 71s with the special cast one-piece bellhousing) used a standard GM belhousing with the cast iron adapter to the T86 and T14.

    So I *think* this will work but others may be more sure than I am. There are pictures of an original bellhousing in my '71 build thread here:
    The Ebay bellhousing appears to have the needed bolt pattern along with an additional one. It seems like it would work.
     
    Fireball, Oct 10, 2021
    #21
  2. Oct 10, 2021
    Peter Dorey

    Peter Dorey Member

    Vista, CA
    Joined:
    Oct 2, 2020
    Messages:
    87
    Alright, Thanks Fireball.
    I bought one and it's on it's way!
     
    Peter Dorey, Oct 10, 2021
    #22
    dnb71R2 likes this.
  3. Oct 22, 2021
    Peter Dorey

    Peter Dorey Member

    Vista, CA
    Joined:
    Oct 2, 2020
    Messages:
    87
    Fireball,

    My Jeep is currently at MIT Drivetrain in El Cajon, CA getting worked on.
    It looks like the bellhousing you pointed me to on Ebay was just the ticket! The old bellhousing is a total mess, it's been cut, ground and welded on.
    Thank you so much!!! :bananatool:
     
    Peter Dorey, Oct 22, 2021
    #23
    Fireball likes this.
  4. Oct 22, 2021
    Fireball

    Fireball Well-Known Member 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Pullman, WA
    Joined:
    Feb 9, 2018
    Messages:
    5,719
    You're very welcome. I'm glad I could help.
     
    Fireball, Oct 22, 2021
    #24
    Peter Dorey likes this.
Page 2 of 2
New Posts