1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Koenig Hardtop Window Weather Stripping

Discussion in 'Early Jeep Restoration and Research' started by Todd Haire, Sep 7, 2022.

  1. Sep 7, 2022
    Todd Haire

    Todd Haire New Member

    Houston, Texas
    Joined:
    Sep 7, 2022
    Messages:
    21
    Hello, I’m interested in what folks use as the roll up window channel weather stripping on the door frame of a Koenig hardtop door. Historically these were a braided metal and cloth material that kept the glass protected, intact and muffled the chatter in the window frame channel.
    Thanks in advance.
     
  2. Sep 7, 2022
    termin8ed

    termin8ed I didn't do it Staff Member

    Mason, MI
    Joined:
    Dec 22, 2002
    Messages:
    4,134
    It's probably been 20 years since I got some but jcwhitney had a number of choices
     
  3. Sep 7, 2022
    Todd Haire

    Todd Haire New Member

    Houston, Texas
    Joined:
    Sep 7, 2022
    Messages:
    21
    Thank you for the quick response!
     
  4. Sep 7, 2022
    PeteL

    PeteL If it wasn't for physics, and law enforcement... 2022 Sponsor 2021 Sponsor 2020 Sponsor

    Hills of NH
    Joined:
    Aug 3, 2003
    Messages:
    8,711
    Ebay probably has a few choices too.
     
    Todd Haire likes this.
  5. Sep 7, 2022
    GillaFunk

    GillaFunk I'm the Dude, so thats what you call me. 2022 Sponsor

    Graeagle Calif...
    Joined:
    Sep 26, 2019
    Messages:
    228
    Oh. I need some of that too.
     
    Todd Haire likes this.
  6. Sep 7, 2022
    Siskiwit

    Siskiwit Member

    Northern Wisconsin
    Joined:
    Aug 13, 2016
    Messages:
    62
    Check out Steel Rubber.
     
    Todd Haire likes this.
  7. Sep 9, 2022
    GillaFunk

    GillaFunk I'm the Dude, so thats what you call me. 2022 Sponsor

    Graeagle Calif...
    Joined:
    Sep 26, 2019
    Messages:
    228
    Wow. Those are spendy. $60 minimum
     
  8. Sep 9, 2022
    Twin2

    Twin2 not him 2022 Sponsor 2021 Sponsor 2020 Sponsor

    Virginia Beach, VA
    Joined:
    Apr 28, 2011
    Messages:
    5,290
    well you need to measure the window channel
    found a left over for one of my project . but it measured 1/2" wide 1/2" tall
    I think it was from when I did meyers door . been so long not sure
    did find this on amazon
    https://www.amazon.com/Automotive-F...lpcontext&ref_=fplfs&psc=1&smid=AX2JDDOWIWCHS

    now as to steele rubber . they are proud of there stuff
    back when I was doing a 41 oldsmobile
    sometimes you forget something and rubber piece is a buck . but for the guy to walk over and put it in envelope 10 dollars S/H
     
New Posts