I think this Jeep was repainted sometime in the 80s if that helps narrow down color options.
I did a bad job with the lighting. Looking to ID the darkest color. Another suggestion was Black Forest Green. It is the color of the Jeep in my...
I’m making the assumption that this is a stock Jeep color (which could be wrong). For reference the middle square is Glenwood Green Metallic and...
Plug wires look fairly new but I should check the distributor cap. I do still suspect the bendex and probably should still pull the starter and...
Okay so today I was able to take a look at some things... Coolant level is fine Pulled the oil dipstick and level is okay (maybe a hair low) but...
Yes, planned on checking valve clearances anyhow
A dropped valve could be pretty devastating.
Yes, that still has me pretty concerned as well.
Maybe not so crazy of an idea after all!
Good news--we've passed the third gear test! I have not been able to pull an oil sample yet.
Currently running 10W-30 high zinc oil.
Oil pressure was around 60 PSI which is typically what it is upon a cold start.
Yes, the engine noise was new and very apparent even from inside the Jeep so I would have noticed it the last time I ran it. The Jeep has been...
The odd thing is that 2 days ago it was running great, so unless something catastrophic happened this AM (very possible) it could potentially be...
Ah I see what you’re asking. As soon as I turn the key I hear a click and it sounds like the starter is trying to go but can’t. I will definitely...
Hi Pete, it appears as though the starter cannot crank the engine. I didn’t have a lot of time this AM to poke around but I did check the battery...
Hi All, Started up the Jeep this AM and it was making a strange noise. No sooner did I get a video of it (link below) and the engine died and...
This is a fantastic video!
Before installing TightSteer, the play in the sector shaft was only present when the steering wheel and tires were in the straight on position....
Update: I pulled the front fender and opened up the Ross box. This is what I'm seeing... It looks like I may have the two-piece sector shaft...
Separate names with a comma.