Progress. Steering box rebuilt and sheet metal is looking better. Here is a test for so we can drive and get remotivated! [ATTACH]
HA! I thought that is why the 1/4-20 holes were drilled 7/16! Plenty of play.
Ok, I will use the rivnuts as I have them and I would prefer to drill a round hole than file a square hole!
59CJ5 is setting the bar pretty high.
These comments and pictures have been very helpful. I will figure out a repair for the drains. I just took this picture of the tub where the...
My throttle pedal was hinged from the bottom, pushing a rod through the firewall to a bell crank. The hinge was attached to the floor with 3...
Thanks, that is a big help. Somehow I could not find anything like that in the service manual or the rebuild guides. Spent a few hours plugging...
I bought some weld nuts to replace the few that are lost. Some of the holes have strange shapes that I will clean up and make round again. I am...
The flange is just visible in the throttle pedal region. There is about 1/2” of ‘flange” where the top plate could slide down. Doing so makes...
Just picked up a ‘55 CJ5 and working with the kids to clean it up. I am repairing some old “battle damage” in the sheet metal for the tunnel and...
Separate names with a comma.