Pico Wiring part number 5665PT or Standard part number S2292. That what I used for mine. Can get one or the other from your favorite auto parts...
It's wrong. That stub on the back of the oil bath air cleaner was used as fresh air supply for a smog pump system that almost everybody removed....
The lock washer thing is a good idea, but split lock washers aren't reliable. For aerospace work (which is what I do) they're not allowed. I'm...
Hey Fellers, It's fixed. Somehow, and I'm almost embarrassed to say, all 8 nuts on the spring U-bolts were loose. One had almost spun itself...
Thanks Ron and ITLKSEZ! No rear locker. It's stock height so the drag link angle is the way it always was. In fact, she's completely stock all...
Lately my Jeep has started doing something very disconcerting while driving. In fact, I first noticed on the highway and it really scared the...
Keep increasing the float level until you see the accelerator pump squirt with a small throttle opening.. That's what fixed it for me. No squirt...
The idle tubes or cluster are not available anywhere I've checked. So the heck with it, once I saw how they were made and how they could be...
To make a long story short, when I first assembled and started to run my rebuilt Dauntless, it had a stmble at low RPM on tip in. Kinda like a...
Sage advice as always Donny. Thanks! Your answer is what I expected. Unless the A-Team distributor is doing something majorly beneficial with...
Fellas, any truth to this? If so, I might do away with my Prestolite distributor and sacrifice originality. I thought a well tuned points setup...
What's not at all clear to me is how it mounts. My starter has a stud sticking out of the end of the starter. On the block, the only hole nearby...
My delco starter doesn't have one, but needs one (aluminum nose piece casting cracked due to all the weight hanging off of it). Does anyone...
I just switched my whole system over to this... Works well. Woody's 4x4 | Clutch & Linkage John
I finished it!!! It's back on the road, runs and drives well. Getting 14.8 MPG in mixed highway and in town. 20210515_133325 by John Gedde...
A 10SI bolted right onto my Dauntless. I used one from a 1985 Buick Skylark. I may have had to reclock the case to get the mounting tang to be...
What you really need is an oil additive from your local auto parts store containing ZDDP (this is a zinc based anti-wear/anti-scuffing additive.)...
Separate names with a comma.