Did my 68 cj5 come with factory seatbelts.
I heard it works better through the vacuum. But Iam no machanic
so i leave the engine running and use about a half bottle through the vacuum, how do i do it slowly, add a little bit at a time, let it run add a...
i wanna run a can of seafoam through the vacuum, can i use the line that unplugs from the distributor. cheers
That's a nice setup my friend
Which ever is the easiest, and trying to keep the cost as low as possible, I take it theres a lot of modding to get power steering.
I wanna start gathering parts can somebody throw up a parts list of what I need, what cars to look for at the junk yard, etc. I have a 68 cj5 v6...
What are my options for replacing my headers on the old girl, the old ones are in rough shape. Trying to keep cost down too. Cheers
Thank God for this site, I was using my puller to take off the rear drums, beating on it for 15 minutes,nothing, then all of the sudden it sounded...
Well I got it running a lot better, it was the weights in the distributor, sloppy As hell, so went out to the junk yard and found a 70s Buick with...
nice, thank you so very much for the fast reply, learning something new every day.
so do i set the timing at 5 degrees on the timing gun and then adjust the distributor timing when the engine is running back to 0 on the marks, if...
what about this dial on the timing gun
wow, i was cleaning up the garage and of course on the other side of the garage i find the little spring on the floor that i was missing, so now i...
gonna try and find a timing light today, i wanna replace the distributor with a HEI one off of eBay, do i have to do any mods to make them work...
here's the missing spring
how can you tell what cap i have or setup
its backfiring from the carb so i took off the distributor cap and noticed i'am missing one of the small springs on the arms, is this why its back...
Just at work, I'll look in the morning, I just got it running and got it as a project, the last owner rebuild the carb and had it running also.
Yes if I take the cap off I can turn the rotor by hand, I can still turn the cap and rotor with the cap installed,
Separate names with a comma.