Is the gauge cluster grounded by the 4 nuts that hold it to the dash? Is there a way to make sure cluster is grounded? or add an extra ground?
Thanks Guys. Yes shut everythingdown unhooked battery and started over. Double green wire @gas gauge was grounding out (they were hot but not...
Ok I jumped solenoid and everything started working BUT ingnition switch getting hot and started smoking! I am not an electrician. Is solenoid...
No wires off or removed. If solenoid is bad will headlights come on?
Battery is fully charged does not turn over. A wire from ignition could have possible been hit. Would that burn up ignition switch? Solenoid or...
Ok. I was replacing temp gauge and in the process fried the gas gauge. Now after getting new gas gauge Jeep won't start. Battery is good. Turn...
quick question. If gas gauge smoked does that automatically mean its bad? or burned up?
Awesome! That helps a lot. I'm thinking ground @ gauge the problem.
Hi All I have a 65 all original cj5 . The factory temp gauge has never worked and I decided to replace the temp and fuel gauge with the factory...
Separate names with a comma.