Ok, put new points and condensor on it. I am now getting 12v all the way through the coil. Gapped the points .016. But still not firing..
No sir. Have not
Don't know anything bout points. Just goin off what friends r telling me. But I would love to get it working. . I'm very willing to learn. I'll...
Thank you. I'll try that. After talking to a few people, I was gonna change it to electronic ignition. I'll try that first. What's your...
Look I'm new to all of this, just trying to learn and get it fixed. I apologize.
I have the blue wire ran through that hole so it don't get pinched. I'll get a new condenser today and see if it helps. Thanks for all the help.
[ATTACH] [ATTACH] [ATTACH] [ATTACH]
5.5 in goin into the coil. Put a jumper from battery to + of coil. And no difference
Also put a new cap a rotary button on it. Still nothing
[ATTACH]
Put a new coil on it and it's only reading 5.5 volts w key on
Mine don't have a ballist resistor. It goes straight from harness to the coil.
Used a fluke 322. Where would that resistor be located if it had one?
Tested the coil, only getting 5 volts. Think it should b 12ish. Gonna get a new coil tomorrow
I've checked timing. Pouring fuel in carburetor still wont fire. Put all new connectors on coil and distributor. No dust or shavings inside cap....
Ok. Ty. I'll look this weekend. . Thanks for all the help
Not humid. Live in Ga. Has HEI. How can I tell if the module or cap is the problem?
Separate names with a comma.