Time to rebuild the Dauntless. Anyone buy an overhaul kit for the 225 lately? Where and how much$$? Anything to watch out for? Thanx.
Where are you guys getting new pistons for the 225's? Or are boring up and using 231's. Need to rebuild mine this winter.
Takes a few minutes, but you can also slit it with a loose hacksaw blade. Will pop right out after slitting and you really cant hurt the hardened...
Thanx Patrick, That seems about right as I was guessing about 1 1/2" need to come off mine. Any reason I can't redrill mine and cut off at...
Does anyone know the stock shackle length for a 69. Mine are 4 1/4" pin to pin.
I just finished the entire rebuild of my T-14A transmission and Dana 18 transfer case this last weekend. Thought I would take a minute to...
It's a stud. You need the stud with a castle nut(cottered) to get the proper thickness to allow the brake lever to rotate. I can go out and...
Can anyone tell me if the Prairie Gold listed for the 69's had a metallic hue to it? The paint chips that I look at online do not look anything...
Thanx guys! Awesome ideas and sources. Davistroy pretty much nailed it for color. I ran this whole M.A.S.H. thing past my 12yo daughter last...
I want to paint my 69 in military colors. Is there a reference anywhere of color schemes that were used on military jeeps of this era? I am stuck...
Someone asked to see a pic of a single stick mounting bracket for a restoration. Here it is.[img]
installation behind the glovebox. glovebox will have to be shortened about 8". [img]
Novack is the highest at $198 and some change. Lowest I found was $132. If it's apples to apples then it's a clear choise. Has anyone bought...
Seems to be quite a range in pricing for T-14 master rebuild kits. Anyone have any advice on a good value for a QUALITY kit that they have...
This is the first of dozens of posts that CLEARLY explain the wiring of #1 terminal off the alternator!!!!!!!!!!! Very cool......Thanx...
Panzer, In your "before" pic, are the front shackles stock? What should the stock length be on a 69? Mine are 4 3/8" and look about like the...
I realize that he says this....... but 3 of the 5 pics in the photo gallery show the key in place.
Dinesh, Is it possible the key is riding up in the Keyway? I believe the SM tells you to assemble the hub to the axle and then insert the...
Thanx Tim! Will dig into it this weekend.
Same condition with engine running or off..idle or highway speeds. The ground is the same as used for all the instrument lights and fuel gauge....
Separate names with a comma.