Can anyone post a picture of the heat shield for the fuel pump on the Dauntless V-6.
O'Reilly's has them, Dorman 690-014 $2.49
National # PB-656-HD or Dorman # 690-014 for bronze bushings
Thanks . Didn't like what I read on the pilot roller bearing, will stay with the bronze bushing.
Haven't read anything about them. Do they last as long as the bushing?
T-14 Trans .Did a search and came up with 10 pages. Still looking
Anyone have the part number for the good bronze bushing that is oil impregnated instead of the one that has some iron in it.?
Plunger -- Napa Part #2-4036
the rockers with the notch, goes forward on passenger side and rear ward on drivers side. No need to take it apart. Don't take it apart and turn...
I've been running the 225 since 1969 and have always used the thin gasket. Never worried about it burning out. It was design that way. Run it.
Use gasket to the right. Part store Fel-Pro # 9288 or carb to intake gasket for a 1963 Chevy Impala 283 2 barrel
Since you have a lath, make your pivot bushing's out of steel 7/8" OD -- 1" .978 th's long and the ID .551 or 14MM and then you can grease...
I pull my drain plug and let it drain overnight and remove the oil filter the next morning after it has cooled down . With the WIX filter there...
I quit using WIX oil filters. They went with a so called state of the art silicone anti drain back valve. I learned this after some research on...
Separate names with a comma.