the v8 and the i6 share mounting locations not sure about the four, on my 74 when it had the 6 the valve cover just missed the firewall but it was...
I thought we had one somewhere...
yes and yes just want a urethane based paint as the liner is urethane too. clean it some with a little enamel reducer first to give a little stick...
I use a third party hosting service, beamingpics easy peassy and run by a member here...[img]
finished the front end ready to wheel this year, waiting on trails to open.[img]
dont know if its relevant but my old yf would build crap in the bottom of the bowl clogging the idle jet slightly resulting in the surge or gallop...
chemical bonds are better than a mechanical one (applied over sanded cured substrate).
the boys 225 was/is marine out of a fresh water(69 chris craft) boat the intake and exhaust manifolds and timing cover were the only external...
I dig the pontiac but dont dig the interior on that one. lincoln for the win
good job plenty shiny for an old jeep :)
I prefer to convert the rust not encapsulate it por paint and products like it are terrible for trapping moisture underneath the finish and...
yes it is and that one looks soild
I use a rust converter after cleaning before paint. this would work Amazon.com: Rust-Oleum 248658 Rust Reformer Spray, 10.25 oz, Black :...
i have seen a chart that showed how to camo different things. its all up to the individual that paints it, they are close enough to have used the...
german........goodentight.
you can only see one side at a time....I once put grab handles on a customer's truck, the tape i used to mark the holes got flipped end for end...
Personally, I would recommend bds for springs way better ride.
3rd party hosting and no resize, I use beaming pics myself
bad ground either the plug is dirty/corroded or the wire where it gets a ground on the body is dirty/loose or green.
sheesh would you even need 4 wheel drive for that?
Separate names with a comma.