Holy #%*t, it works. Mounted the box, put ths steering shaft in, I had to cut and lehgthen it cuz I could not find the 5" long u joint, new ones...
Thanks. I tink I will finish the shaft and mont the box and try again with everything connected. I did not crank it very long as the battery was...
doing a power steering conversion so I got the pump(early GM) pump mounted, put on a fanbelt, put some fluid in and turned the Jeep over and I...
my CJ is 4" to the top of the mount from the under seat fuel tank. There is a approx 1" spacer between the top of the mount and the bottom of the...
I learned something new today. According to summit, you need to count the number of splines and include the flat spot. Basically, split the shaft...
It is a 26 spline and all the 26 spline joints I see are 9/16 which is too small for the spline shaft. I will call summit and see if they can get...
[IMG] [IMG] Doing conversion from manual saginaw to power steering. The part is the old u joint that connects the steering column to the...
Thanks Tim for the link to ifsj site. JP, I will buy the rubber mount if you got em to sell. I may have found a guy to weld but any referrals...
previous owner did a front springover and cut the fenders. I flipped the rear shackles to level it out.
OK, my sickness struck once again and I could not resist the 67 wagoneer with the new 33" tires, straight body, 327 vigalante engine. The fan had...
Separate names with a comma.