Tarry this is the current set up. sliders to the back. the front one is burned in, the front spring mount is just tacked for purposes of moving it...
Also I am running HD ome springs from an xj front and rear. And plan on building anti wrap bars front and rear. The rear leafs are on the...
I'll take some better pictures and add some dimensions to the thread this weekend. .
With the high steer arms the cross linkage for the arms is 2 to 3in in front of the Crank pulley. To put the engine more forward I would have to...
I was more worried about axle to oil pan clearance. You got me thinking.
yes the firewall will be pushed back 7'ish inches around the engine, similar to what hotrod guys do on model a fords and 32's. I want to use the...
Since space is at a premium in my garage I used the roughed in back bumper of the CJ. Also here are some more pics because threads with out pics...
Here is how i got the side panels to match the original jeep panels. I figured out that the radius on the 2X4 tube is the same as the bottom...
Thanks for the kind words. The hardest part is finding time to work on it. Vw was supposed to be a flip but i kind of like it. [IMG]
[IMG]
Little picture update. Not much has happened in a couple months. Moving houses does that. Just rolled it off the trailer in these pics, and it is...
The body was twisted pretty good when I bought it. I will pull it back into shape as I go along. On the agenda for today is templates for the...
I proof read the post and still had that typo. I used poster board on the template and copied that to steel and cut it out.
I have no idea on the brand, it was given to me as a gift years ago. I just kept my eye out for the right profile. The rails could be done with...
The pictures are taken with a Cell phone. It's all I have, sorry about the quality. Does the CJ6 Floor kick up in the same place or does it...
Than did the same to the Drivers side. [IMG][IMG] Now the Floor needs to be built. [IMG]
Starting on the 20in stretch. I am hoping a Cj6 top fits. [IMG] [IMG][IMG] I will have to figure out something for the floor along the way [IMG]...
The body work. [IMG] Made a template out of poster board and got cut out in 18 gauge steel, than tacked in. It came out ok, I have not welded...
I got the engine and trans half mounted then started working on the body stretch. My thought was to see where the body lands on the frame and...
I did not like the front of the Frame so i changed it. I don't have a good picture of it currently. Weather sucks i don't want to push it out...
Separate names with a comma.