At Last a vote!!!! and a reason!!! Thankyou!!! any one else?
Nope i did replace ball joints but really need tires before getting alingment checked What I was really hoping for was opinions on moving leaf...
one inch body and about two on new springs
Ok you brainy fellas we all know that a 73 cj5 squirrels it's way down the highway. I have replaces a lot of steering parts including all four...
it's been used to launch boats...Drain the axles and check the berings odds are axles have more water than fluid
Two 1/2 copper elbows a leanth of straight hose and clamps worked for my 73
Take a hard look under that tub if the floor is rotten then the channel under it may also need replacing and the body bushings replacement parts...
Have you tried adjusting the steering stop ? it's easy just find the stop bolts behind the hub and screw in or out.
A buddy at Napa Parts says 71-72 Wagoneer is closest match for my 73 Cj5 So far he's not lead me astray
ya know I hunted in our back yard last year. The drive up the Poudre had me installing a sway bar soon as I got back here to Canon City. No Elk or...
Well ok I'll start with the float and see if I can find a jet to put her more in a mid range between 5,000 and 12,000 maybe say the 9,000 mark...
Monarch is about 12,000 ft I'm at 5,000 she loses ground on steep hills at this alt also just never as bad as monarch I was waiting for spandex...
Hello Brian This is Colorado it's all altitude :-) Timing is good climbing in first two gears is fine This machine is as far as I can tell all...
Hi Guys ! I'm new at this and at asking for help but here goes. Last year I bought a 73 cj5 and like those who have gone before me I am going...
Separate names with a comma.