With the wire hooked up you have to know if the distributor points are open or closed to get a proper reading.
I've used the ARB lockers in my Jeep for about 10 years worth of winters in the northwest with absolutely no problems. No clanks, clunks or any...
I'm well aware of all your tips. I just don't like to see my Jeep sag in the back---I like it level. Right now I have 450 lb. of cement in back...
Question: Where can I get a set of bolt on, blow-up shocks or air bags to fit my '80 CJ5 with a 4" lift kit? The're for the times I hook up to...
If you are in the spending mode on your Jeep, consider a good set of lockers. They make a world of difference. Also, if you are decelerating...
Years ago my '74 CJ5 did exactly as is being described here. Cleaning the battery terminals fixed the problem!
My '80 CJ-5 with a 4" lift kit did the same thing. The floor panel around the shift lever had to be cut out to allow additional travel. The lift...
Thanks for looking! I pretty much expected that answer.
Does anyone make bolt on air bags to fit an '80 CJ-5 with a 4" lift kit?
My 80 CJ-5 has a 4" lift kit. I could get it into 4WD but it would pop out after a short distance. I now have to leave the boot loose so it will...
The first time it got hot I smelled grease & there was smoke coming out of the drum, although when I pulled the drum there was grease on the wheel...
Right or wrong, the axle is in and runs nice & cool. The problem is, the brake drum gets scorching hot. When I pull it off, the brakes are hot...
The simple answer I got from the machinist in town was that the Green bearing is a ball bearing and needs no preload. The Timkin bearing is a...
That was my question, why make the spacer at all? With the retainer holding the bearing outboard and the backplate bolted in place, the bearing...
That all sounds reasonable but I've got to wonder, why does this bearing need a spacer when the one I just took out did not need one? Everything...
I've just received the kit to get rid of the Green bearing. It includes a spacer between the inside of the housing and the bearing. After...
Re: CJ5 Rear Axel Green is the name of the company who makes the bearing to fit the axel I preiviously described! The kit I ordered eliminates...
Re: CJ5 Rear Axel Thanks for the info, however the axels in the AMC 20 rear differential in my Jeep will only accept Green bearings. This...
I'm new here so please ignore the screwups! I have a 1980 CJ5 with a one piece flanged rear axel. As it takes a Green bearing I'd like to switch...
Separate names with a comma.