Looks good. Nice job.
Cool calculator With three gear sets 5.38 @4000 rpm 55mph 4.88 @3000 rpm 60mph 4.56 @3000 rpm 65mph Also went to 33" tires all have good...
Cool I'll check that out. Must go get some stats first.
The 5:38s only have to buy one set of gears already have set for rear centered 44.
How dose the math work for this combo? High and low. T18 d300 5:38s with 34s 231 odd-fire driven it.
I have a 44 rear d18 t98 and a 27 front. I picked up in a deal a30 front t-18 Trans mated to a d-300t case with a Dana44 centered rear and an...
Look for number on the top of the block behind the intake in the little dip above the top of the bell housing where it mates to the block.
I have a 63 cj6 with factory t-98and d-18 it had the 134 in it when it began life.
Hope that helps
[IMG]
Good to know thanks.
Just before you crack it over you can ether make a rod or maybe buy one to stick down the dist. Hole to the oil pump and prime with a drill...
Good to hear that worked.
You might c check to see for sure that the friction plate is in the right way. I put one in backwards once and it would not disengage. The torque...
Given those years and the fact that the link above states that it is odd fire and no HEI. Those changes started later then that. In like 77 if I...
Thanks a bunch by the way. It is always fun deciphering the truth from what your told.
Separate names with a comma.