I can't seem to find any information on how much the lever (throwout fork) coming out of the bell housing should move to engage and disengage the...
Thanks for the comments. Most of the lighting problems have been solved. There must have been some loose or mudded up wires. Right now I am...
Any thoughts? I am heading to check out the jeep Sunday morning and don't want to mess anything up more...
But is it possible that I could have gotten mud up in there (through a worn boot on the clutch linkage) that would keep me from being able to use...
No help? I must have reached my limit of questions allowed..... A guy on another forum suggested pulling off the boot around the shifter and...
Is there an access panel on the bellhousing (or thereabout) that would let me see the condition of the clutch without having to drop the tranny?...
Thanks for the suggestion. I have gone under the jeep and cleaned off most the mud. For the clutch, the linkage looks fine except for there...
I'm going to replace the starter and reinforce a body mount near the firewall, but I'm pretty sure the clutch will need to be replaced too....
Ok so I'm having some more problems. I took my CJ5 on a nice trail ride over the weekend and ended up getting stuck in some pretty deep mud....
How often do you guys replace those fluids? Do you keep a regular maintenance schedule or just change them when they become discolored? Do you...
Well that is part of the problem... since the body was replaced with fiberglass there are lots of electrical problems (likely due to grounding)...
No one has any cooling tips? Would it help to add a fan shroud to the radiator? I don't have one now and I've heard that this could help. Are...
Does anyone have any tips on making the engine run cooler? I know that it may be because it is about 95 degrees out today, but she is running hot...
No more squealing!!!! Thanks guys for all of the advice, but it actually ended up being somethings quite different. The problem was a loose...
The way the lights are set up right now is that both the side marker lights and the "cat's eye" lamps flash to signal a turn. I should probably...
Ok, so I got the headlights all fixed... it turns out it was a problem with the floor switch... but they work now. My first victory :) I also...
I know that the lower two lights function as signal lamps, but they have white bulbs on my jeep. (See pictures in link below) The signal lamps on...
I checked the frame and I found a crack... it is about 6 inches long on the inside of the frame on the drivers side near what I think is a skid...
Happy birthday, but seriously... is that the button for the brights? I've never seen such a thing... but this is also the first car I've driven...
There is a high beam switch on the floor?! Shows how much I know..... give me time though, its my first jeep :) Is the floor highbeam switch...
Separate names with a comma.