Hi everyone, it's been a while since I have posted on here. Life has gotten in the way of my Willy's M38A1 project and unfortunately, I'm going to...
look into www.kaiserwillys.com they have a good selection of military/non-directional tires and pretty decent pricing
Yeah I almost did that with my impact wrench. Any idea about the grease for the hubs though?
So last night while I was swapping out my old warn hubs for the new premium ones I bought, I noticed something strange. While taking off the front...
So I have made a decision. After starting the work on rebuilding/thoroughly cleaning I decided to just suck it up and buy some new hubs. I found a...
It doesn't turn at all. Posted via Mobile Device
So i finished cleaning everything all up... BUT The 12 needle rollers were all accounted for, the one in the picture was not one of the 12?? I...
Okay, sorry it took so long. I had an issue finding my air tools. The wheels spin freely with it in 4w-low with and without the hubs locked. I...
My brakes are also really bad I need to bleed them. They tend to sieze up after slowing down... Posted via Mobile Device
Had a chance to check the front wheels. Neither one of them were able to turn freely. I tried both locked and unlocked on both sides. I haven't...
Thanks for the advice. I have not had time to work on her lately bc of work but this weekend is free so there will be some surgery done. If the...
I have a 57 M38A1. Recently, after running it in 4wd, I have noticed a whinning noise coming from the front end. I'm pretty sure its from my...
if it is a wheel cylinder, how much would it cost to fix and would i be able to do it myself?
The tires are 31X10.5, but i was having the problem before I put them on. I just put some older pictures of it up on an album
Not really, it just hardly stops, it has been sitting for about 6 months, just starting it up once a week
I have a 57 willys cj, although it has tell-tell signs that it is an M38A1, none the less, my brakes are really tight, it is difficult to press...
I do appreciate the advice, now comes the fun part of ripping them out of the old truck. Oh the joys of sawz-alls
I have been a member for a while now but I haven't been active in a while. My jeep has been put on hold for a while and I'm now getting back to...
Yeah I was looking at the pics of the m38a1's on here, I have the filler neck on the side by the pasenger seat. There once was a hole on the right...
no its a manual choke. When I do apply the choke it sticks and floods out...
Separate names with a comma.