http://www.earlycj5.com/forums/showthread.php?p=254351 there's a link on this page taking you to a jeepster web page which should have...
Does anyone know of a fuel pressure regulator that goes from about 2 psi to approx 7 or 8 psi? I have found a number that go from 1-4 and 4 or 5...
that's kinda where I was thinking of heading. Thanks
Hey, I was wondering if anyone has any recommendations for an ideal fuel pressure on a stock 360 engine with an Edelbrock Performance 600 carb? I...
carry something that displaces water and evaporates quickly with you as well. Some people will use wd-40 I've heard, but I'd just get some...
Hey, I've just about finished building my harness, so if you have any questions, let me know and I'll try to answer them as best I can. I would...
I would guess that you have a short within your ingnition switch itself. If you could disconnect it and shoot the circuit with a multimeter it'd...
If some of the wire insulation damage isn't too extensive, go to the hardware/ auto store and get some heat-shrink tubing. If you look around you...
I am nearly done with a complete re-wiring job on my 73 CJ5. If you can pick up a kit for that price, I would recommend it. I haven't saved a lot...
I'd check battery amperage on this one. I doubt it's a ground problem because if it was it would act more...chaotic, not as easily to predict....
that's what I was looking for. Thanks for the help
I already have that switch, and it does include the hazard below the arm. I really only need to know which wires go where on it.
you could also be dealing with a bad solenoid, as I had just a few weeks ago. They're not that expensive, something like 12 or 15 dollars. If...
Ok, I'm new here, but I've got a 73 cj5 that I'm working on improving. It just got a rebuilt 360 a few months back, and then my buddy and I cut...
Separate names with a comma.